kritikaoswal
1 post
Jun 26, 2025
12:15 AM
|
To get a mirror finish with Glasurit 2K topcoat,start by prepping the surface well—clean, sand, and make sure it’s dust-free. Mix the topcoat with the correct hardener and reducer (usually 2:1:10%), then spray 2–3 even coats using an HVLP gun with a 1.3–1.4mm nozzle. Allow proper flash time between coats. After drying (air or bake), wet sand with P1500–P3000 grit to smooth out imperfections. Finish with a good polish and swirl remover. Always follow Glasurit’s datasheet for best results—it makes a big difference.
|
